Default Settings - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 16-8 Displays Autocreated PortChannels
switch# show interface fc1/1
fc1/1 is trunking
...
Example 16-9 Displays the Specified PortChannel Interface
switch# show port-channel database interface port-channel 128
port-channel 128
Example 16-10 Displays the PortChannel Summary
switch# show port-channel summary
------------------------------------------------------------------------------
Interface
------------------------------------------------------------------------------
port-channel 1
port-channel 2
port-channel 3
port-channel 4
port-channel 5
port-channel 6
Default Settings
Table 16-3
Table 16-3
Parameters
PortChannels
Create PortChannel
Default PortChannel mode
Autocreation
Cisco MDS 9000 Family CLI Configuration Guide
16-20
Hardware is Fibre Channel, FCOT is short wave laser
Port WWN is 20:0a:00:0b:5f:3b:fe:80
...
Receive data field Size is 2112
Beacon is turned off
Port-channel auto creation is enabled
Belongs to port-channel 123
Administrative channel mode is active
Operational channel mode is active
Last membership update succeeded
Channel is auto created
First operational port is fc1/1
1 ports in total, 1 ports up
Ports: fc1/1 [up] *
Total Ports
lists the default settings for PortChannels.
Default PortChannel Parameters
Oper Ports
1 0
1 1
0 0
0 0
1 1
0 0
Default
FSPF is enabled by default.
Administratively up.
ON.
Disabled.
Chapter 16 Configuring PortChannels
First Oper Port
--
fc8/13
--
--
fc8/3
--
OL-16184-01, Cisco MDS SAN-OS Release 3.x