Default Settings - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 10 Managing System Hardware
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Power Usage Summary:
--------------------
Power Supply redundancy mode:
Total Power Capacity
Power reserved for Supervisor(s)[-]
Power reserved for Fan Module(s)[-]
Power currently used by Modules[-]
Total Power Available

Default Settings

Table 10-4
Table 10-4
Parameters
Power supply mode
OL-16184-01, Cisco MDS SAN-OS Release 3.x
lists the default hardware settings.
Default Hardware Parameters
Default
Redundant mode.
redundant
919.38 W
220.08 W
0.00 W
0.00 W
-------
699.30 W
-------
Cisco MDS 9000 Family CLI Configuration Guide
Default Settings
10-21