HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 1040

Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 42-3 Displays Detailed iSCSI Statistics for the iSCSI Interface
switch# show iscsi stats iscsi 2/1 detail
iscsi2/1
5 minutes input rate 704 bits/sec, 88 bytes/sec, 1 frames/sec
5 minutes output rate 704 bits/sec, 88 bytes/sec, 1 frames/sec
iSCSI statistics
bytes
iSCSI Forward:
Command:2352 PDUs (Rcvd:2352)
Data-Out (Write):16236 PDUs (Rcvd 44198), 0 fragments, 92364800 bytes, unsolicited 0
bytes
FCP Forward:
Xfer_rdy:1804 (Rcvd:1804)
Data-In:90453 (Rcvd:90463), 92458248 bytes
Response:2352 (Rcvd:2362), with sense 266
TMF Resp:0
iSCSI Stats:
Login:attempt:13039, succeed:110, fail:12918, authen fail:0
Rcvd:NOP-Out:914582, Sent:NOP-In:914582
Immediate data failure::Separation:0
Unsolicited data failure::Separation:0, Segment:0
Sequence ID allocation failure:0
FCP Stats:
Total:Sent:47654
Sent:PLOGI:10, Rcvd:PLOGI_ACC:10, PLOGI_RJT:0
Rcvd:PLOGI:156, Sent:PLOGI_ACC:0, PLOGI_RJT:156
iSCSI Drop:
Command:Target down 0, Task in progress 0, LUN map fail 0
Data-Out:0, Data CRC Error:0
TMF-Req:0, No task:0
Unsolicited data:0, Immediate command PDU:0
FCP Drop:
Xfer_rdy:0, Data-In:0, Response:0
Cisco MDS 9000 Family CLI Configuration Guide
42-32
974454 packets input, 142656516 bytes
Command 2352 pdus, Data-out 44198 pdus, 92364800 bytes, 0 fragments, unsolicited 0
output 1022618 packets, 143431144 bytes
Response 2352 pdus (with sense 266), R2T 1804 pdus
Data-in 90453 pdus, 92458248 bytes
NOP-In:0, Sent:NOP-Out:0
TMF-REQ:0, Sent:TMF-RESP:0
Text-REQ:18, Sent:Text-RESP:27
SNACK:0
Unrecognized Opcode:0, Bad header digest:0
Command in window but not next:0, exceed wait queue limit:0
Received PDU in wrong phase:0
SCSI Busy responses:0
Add header:0
Received:96625 (Error:0, Unknown:0)
PRLI:10, Rcvd:PRLI_ACC:10, PRLI_RJT:0, Error:0, From initiator:0
LOGO:4, Rcvd:LOGO_ACC:0, LOGO_RJT:0
PRLO:4, Rcvd:PRLO_ACC:0, PRLO_RJT:0
ABTS:0, Rcvd:ABTS_ACC:0
TMF REQ:0
Self orig command:10, Rcvd:data:10, resp:10
LOGO:0, Sent:LOGO_ACC:0, LOGO_RJT:0
PRLI:8, Sent:PRLI_ACC:8, PRLI_RJT:0
PRLO:0, Sent:PRLO_ACC:0, PRLO_RJT:0
ADISC:0, Sent:ADISC_ACC:0, ADISC_RJT:0
ABTS:0
CmdSeqNo not in window 0, No Exchange ID 0, Reject 0
No task:0
Chapter 42 Configuring iSCSI
OL-16184-01, Cisco MDS SAN-OS Release 3.x