HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 232

Automated Upgrades
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
------
Do you want to continue with the installation (y/n)?
Example 7-8
Example 7-8
switch# install all system bootflash:isan-1.3.2a kickstart bootflash:boot-1.3.2a
Verifying image bootflash:/boot-1.3.2a
[####################] 100% -- SUCCESS
Verifying image bootflash:/isan-1.3.2a
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/isan-1.3.2a.
[####################] 100% -- SUCCESS
Extracting "ips" version from image bootflash:/isan-1.3.2a.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/isan-1.3.2a.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/boot-1.3.2a.
[####################] 100% -- SUCCESS
Extracting "loader" version from image bootflash:/boot-1.3.2a.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Cisco MDS 9000 Family CLI Configuration Guide
7-18
---------- --------------------
1 slc
1 bios v1.1.0(10/24/03)
2 ips
2 bios v1.1.0(10/24/03)
3 slc
3 bios v1.1.0(10/24/03)
4 slc
4 bios v1.1.0(10/24/03)
5 system
5 kickstart
5 bios v1.1.0(10/24/03)
5 loader
6 system
6 kickstart
6 bios v1.1.0(10/24/03)
6 loader
7 slc
7 bios v1.1.0(10/24/03)
8 slc
8 bios v1.1.0(10/24/03)
9 ips
9 bios v1.1.0(10/24/03)
displays the install all command output of a failed operation due to a lack of disk space.
Failed Operation Due to a Full bootflash: File System
bootable Impact
-------- --------------
1 yes non-disruptive
2 yes disruptive
3 yes non-disruptive
4 yes non-disruptive
5 yes non-disruptive
--------------------
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.2(2) 1.2(2)
1.3(1) 1.3(2a)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.2(2) 1.2(2)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
[n]
Install-type Reason
------------ ------
rolling
rolling Hitless upgrade is not supported
rolling
rolling
reset
Chapter 7 Software Images
------------
yes
no
yes
no
yes
no
yes
no
yes
yes
no
no
yes
yes
no
no
yes
no
yes
no
yes
no
OL-16184-01, Cisco MDS SAN-OS Release 3.x