Sample Dpvm Configuration - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 21 Creating Dynamic VSANs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Legend: "+" New Entry, "-" Missing Entry, "*" Possible Conflict Entry
---------------------------------------------------------------------
+ pwwn
- pwwn
* pwwn

Sample DPVM Configuration

To configure a basic DPVM scenario, follow these steps:
Enable DPVM and enable DPVM distribution.
Step 1
switch1# config
Enter configuration commands, one per line.
switch1(config)# dpvm enable
switch1(config)# end
switch1# show dpvm database
switch1# show dpvm database active
switch1# show dpvm status
At this stage, the configuration does not have an active DPVM database and the auto-learn
option is disabled.
Step 2 Activate a null (empty) database so it can be populated with autolearned entries.
switch1# config
Enter configuration commands, one per line.
switch1(config)# dpvm activate
switch1(config)# dpvm commit
switch1(config)# end
switch1# show dpvm database
switch1# show dpvm database active
switch1# show dpvm status
At this stage, the database is successfully activated and the auto-learn option continues to be disabled.
Enable the auto-learn option and commit the configuration changes.
Step 3
switch1# config
Enter configuration commands, one per line.
switch1(config)# dpvm auto-learn
switch1(config)# dpvm commit
switch1(config)# end
switch1# show dpvm database active
pwwn 21:00:00:e0:8b:0e:74:8a vsan 4(*)
pwwn 21:01:00:e0:8b:2e:87:8a vsan 5(*)
[Total 2 entries]
* is auto-learnt entry
switch1# show dpvm ports
--------------------------------------------------------------
Interface
--------------------------------------------------------------
fc1/24
fc1/27
switch1# show flogi database
---------------------------------------------------------------------------
INTERFACE
---------------------------------------------------------------------------
fc1/24
fc1/27
Total number of flogi = 2.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
55:22:33:44:55:66:77:88
11:22:33:44:55:66:77:88
44:22:33:44:55:66:77:88
Vsan Device pWWN
4 21:00:00:e0:8b:0e:74:8a
5 21:01:00:e0:8b:2e:87:8a
VSAN FCID
4 0xe70100 21:00:00:e0:8b:0e:74:8a
5 0xe80100 21:01:00:e0:8b:2e:87:8a
vsan 55
vsan 11
vsan 44
End with CNTL/Z.
End with CNTL/Z.
End with CNTL/Z.
Device nWWN
20:00:00:e0:8b:0e:74:8a
20:01:00:e0:8b:2e:87:8a
PORT NAME
20:00:00:e0:8b:0e:74:8a
20:01:00:e0:8b:2e:87:8a
Cisco MDS 9000 Family CLI Configuration Guide
Sample DPVM Configuration
NODE NAME
21-11