About Filter Contents
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 33-1
Protocol
TCP
1. If the TCP connection is already established, use the established option to find matches. A match occurs if the TCP datagram
ICMP Information
IP packets can be filtered based on the following optional ICMP conditions:
•
•
Table 33-2
Table 33-2
ICMP Type
echo
echo-reply
destination unreachable
traceroute
time exceeded
1. ICMP redirect packets are always rejected.
TOS Information
IP packets can be filtered based on the following optional TOS conditions:
•
•
Cisco MDS 9000 Family CLI Configuration Guide
33-4
TCP and UDP Port Numbers (continued)
1
has the ACK, FIN, PSH, RST, or URG control bit set.
The icmp-type: The ICMP message type is a number from 0 to 255.
The icmp-code: The ICMP message code is a number from 0 to 255.
displays the value for each ICMP type.
ICMP Type Value
1
Code
8
0
3
30
11
The TOS level: The level is specified by a number from 0 to 15.
The TOS name: The name can be max-reliability, max-throughput, min-delay, min-monetary-cost,
and normal.
Chapter 33
Configuring IPv4 and IPv6 Access Control Lists
Port
ftp
ftp-data
ssh
telnet
smtp
tasacs-ds
www
sftp
http
wbem-http
wbem-https
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Number
20
21
22
23
25
65
80
115
143
5988
5989