Displaying Rlir Information - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Configuring FICON Ports
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To specify the RLIR preferred host for a VSAN, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# rlir preferred-cond fcid 0x772c00
vsan 5
switch(config)# no rlir preferred-cond fcid
0x654321 vsan 2
To display the RLIR preferred host configuration, use the show rlir erl command.
switch# show rlir erl
Established Registration List for VSAN: 5
----------------------------------------------
FC-ID LIRR FORMAT REGISTERED FOR
----------------------------------------------
0x772c00 0x18 conditional receive(*)
0x779600 0x18 conditional receive
0x779700 0x18 conditional receive
0x779800 0x18 conditional receive
Total number of entries = 4
(*) - Denotes the preferred host

Displaying RLIR Information

The show rlir statistics command displays the complete statistics of LIRR, RLIR, and DRLIR frames. It
lists the number of frames received, sent, and rejected. Specify the VSAN ID to obtain VSAN statistics
for a specific VSAN. If you do not specify the VSAN ID, then the statistics are shown for all active
VSANs (see Examples
Example 28-1 Displays RLIR Statistics for All VSANs
switch# show rlir statistics
Statistics for VSAN: 1
------------------------
Number of LIRR received
Number of LIRR ACC sent
Number of LIRR RJT sent
Number of RLIR sent
Number of RLIR ACC received
Number of RLIR RJT received
Number of DRLIR received
Number of DRLIR ACC sent
Number of DRLIR RJT sent
Number of DRLIR sent
Number of DRLIR ACC received = 0
Number of DRLIR RJT received = 0
Statistics for VSAN: 100
-------------------------
Number of LIRR received
Cisco MDS 9000 Family CLI Configuration Guide
28-28
28-1 and 28-2).
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 26
Chapter 28
Purpose
Enters configuration mode.
Specifies FC ID 0x772c00 as the RLIR
preferred host in VSAN 5. (FC ID
0x772c00 is used here as an example.)
Removes FC ID 0x772c00 as the RLIR
preferred host for VSAN 5.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Configuring FICON