About Generation 2 Modules And Switches - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring Generation 2 Switches and Modules
The Cisco MDS 9500 Series switches and Cisco MDS 9216A and Cisco MDS 9216i switches support a
set of modules called Generation 2 modules. This chapter describes how to configure these modules, as
well as Generation 2 Multilayer Fabric Switches.
This chapter includes the following sections:
•
•
•
•
•
•
•
•

About Generation 2 Modules and Switches

Table 14-1
9216A and Cisco MDS 9216i switches, as well as the Fabric switches:
Table 14-1
Part Number
Module
DS-X9148
DS-X9134
DS-X9124
DS-X9304-18K9
DS-X9112
DS-X9704
DS-X9530-SF2-K9
Switch
OL-16184-01, Cisco MDS SAN-OS Release 3.x
About Generation 2 Modules and Switches
Buffer Credit Allocation, page 14-7
About Combining Generation 1 and Generation 2 Switching Modules, page 14-16
Configuring Generation 2 Module Interface Shared Resources, page 14-20
Disabling ACL Adjacency Sharing for System Image Downgrade, page 14-35
Displaying SFP Diagnostic Information, page 14-35
Example Configurations, page 14-36
Default Settings, page 14-38
identifies the modules supported by the Cisco MDS 9500 Series switches and Cisco MDS
Generation 2 Fibre Channel Modules and Fabric Switches
Product Name/Description
48-port 4-Gbps Fibre Channel switching module
34-port 4-Gbps Fibre Channel switching module
24-port 4-Gbps Fibre Channel switching module
18-port 4-Gbps Fibre Channel switching module with 4 GigabitEthernet ports
12-port 4-Gbps Fibre Channel switching module
4-port 10-Gbps Fibre Channel switching module
Supervisor-2 module (Cisco MDS 9500 Series switches only)
14
C H A P T E R
Cisco MDS 9000 Family CLI Configuration Guide
14-1