HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 712

Default Settings
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 28-3
Parameters
FICON feature
Port numbers
FC ID last byte value
EBCDIC format option
Switch offline state
Mainframe users
Clock in each VSAN
Host clock control
SNMP users
Port address
Prohibited ports
Cisco MDS 9000 Family CLI Configuration Guide
28-50
Default FICON Settings
Default
Disabled.
Same as port addresses.
0 (zero).
US-Canada.
Hosts are allowed to move the switch to an offline state.
Allowed to configure FICON parameters on Cisco MDS
switches.
Same as the switch hardware clock.
Allows host to set the clock on this switch.
Configure FICON parameters.
Not blocked
Ports90–253 and 255 for the Cisco MDS 9200 Series
switches.
Ports250–253 and 255 for the Cisco MDS 9500 Series
switches.
Chapter 28 Configuring FICON
OL-16184-01, Cisco MDS SAN-OS Release 3.x