Updating The Compactflash Firmware; Updating The Compactflash Firmware On Demand - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Cisco mds 9000 family cli configuration guide, release 3.x (ol-16184-01, april 2008)

Hide thumbs Also See for Cisco MDS 9020 - Fabric Switch:

Table of Contents

Updating the CompactFlash Firmware

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

-----------------------------------------------------------------

-----------------------------------------------------------------

Updating the CompactFlash Firmware

In Cisco SAN-OS Release 3.1(3), you can update the CompactFlash firmware on selected modules. By

default, the firmware update feature is enabled to automatically update the firmware every 30 days (you

can manually set the firmware update intervals by using the system health module cf-re-flash

frequency command in configuration mode). You can also update the firmware on demand by using the

system health cf-re-flash module command in EXEC mode.

Firmware updates can be enabled on the following modules:

This section includes the following tasks:

To update the CompactFlash firmware on demand, use the system health cf-re-flash module command

in EXEC mode.

switch# system health cf-re-flash module number

Where number indicates the slot in which the identified module resides. For example:

switch(config)# system health cf-re-flash module 4

Cisco MDS 9000 Family CLI Configuration Guide

DS-X9302-14K9

DS-X9308-SMIP

DS-X9304-SMIP

DS-X9530-SF1-K9

Updating the CompactFlash Firmware On Demand, page 10-6

Enabling and Disabling the CompactFlash Firmware Update, page 10-7

Setting the CompactFlash Firmware Update Interval, page 10-7

Enabling and Disabling Failure Action at the Failure of a CompactFlash Firmware Update,

Displaying the Frequency and Status of CompactFlash Updates, page 10-8

OL-16184-01, Cisco MDS SAN-OS Release 3.x

Managing System Hardware

Table of Contents