Committing Changes - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 21 Creating Dynamic VSANs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 4
switch(config-dpvm-db)# exit
switch(config)#
Step 5
switch(config)# dpvm activate

Committing Changes

If you commit the changes made to the configuration, the configuration in the DPVM pending database
are distributed to other switches. On a successful commit, the configuration change is applied throughout
the fabric and the lock is released.
To commit the DPVM pending database, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# dpvm commit
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Purpose
Exits to configuration mode.
Activates the DPVM config database.
Purpose
Enters configuration mode.
Commits the database entries that are currently in the DPVM
pending database.
Cisco MDS 9000 Family CLI Configuration Guide
DPVM Database Distribution
21-7