HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 248

Cisco mds 9000 family cli configuration guide, release 3.x (ol-16184-01, april 2008)
Hide thumbs Also See for Cisco MDS 9020 - Fabric Switch:
Table of Contents

Advertisement

Maintaining Supervisor Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch# copy running-config startup-config
Verify that the switch is running Cisco SAN-OS Release 3.0(1) or later. Upgrade the switch, if necessary
Step 3
(see the
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2005, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
kickstart: version 3.0(1) [build 3.0(0.294)] [gdb]
system:
...
Issue a show module command to determine which Supervisor-1 module is the standby.
Step 4
switch# show module
Mod
---
1
2
3
4
5
6
...
Step 5
Take the standby Supervisor-1 module out of service.
switch# out-of-service module 5
Verify that the standby Supervisor-1 module is powered down.
Step 6
switch# show module
Mod
---
1
2
3
4
5
6
...
Step 7
Remove the standby Supervisor-1 module from the chassis. Ensure that the management interface on the
active Supervisor-1 module is shut down. (Ensures that the Supervisor-2 boots TFTP from the TFTP
server under the loader prompt when the Supervisor-2 module uses the same IP address.)
switch# config t
switch(config)# interface
switch(config)# exit
switch# config t
switch(config)# interface mgmt 0
switch(config-if)# shut
switch(config-if)# end
switch#
Cisco MDS 9000 Family CLI Configuration Guide
7-34
"Automated Upgrades" section on page
version 0.0.11
version 3.0(1) [build 3.0(0.294)] [gdb]
Ports
Module-Type
-----
-------------------------------- ------------------ ------------
16
1/2 Gbps FC Module
32
Storage Services Module
8
IP Storage Services Module
12
1/2/4 Gbps FC Module
0
Supervisor/Fabric-1
0
Supervisor/Fabric-1
Ports
Module-Type
-----
-------------------------------- ------------------ ------------
16
1/2 Gbps FC Module
32
Storage Services Module
8
IP Storage Services Module
12
1/2/4 Gbps FC Module
0
Supervisor/Fabric-1
0
Supervisor/Fabric-1
7-6).
Model
Status
DS-X9016
ok
DS-X9032-SSM
ok
DS-X9308-SMIP
ok
DS-X9112
ok
DS-X9530-SF1-K9
ha-standby
DS-X9530-SF1-K9
active *
Model
Status
DS-X9016
ok
DS-X9032-SSM
ok
DS-X9308-SMIP
ok
DS-X9112
ok
powered-dn
DS-X9530-SF1-K9
active *
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 7
Software Images

Advertisement

Table of Contents
loading

Table of Contents