HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 410

Cisco mds 9000 family cli configuration guide, release 3.x (ol-16184-01, april 2008)

Hide thumbs Also See for Cisco MDS 9020 - Fabric Switch:

Table of Contents

Configuring Generation 2 Module Interface Shared Resources

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

switch (config-if)# shutdown

Display the interface status to confirm the shutdown of all shared ports.

switch(config-if)# end

switch# show interface brief

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------

Disable restrictions on oversubscription ratios for the ports.

switch# config t

Enter configuration commands, one per line.

switch(config)# no rate-mode oversubscription-limit module 2

Bring up the ports that you shut down in step 2, and display their status to confirm that they are no longer

switch(config)# interface fc2/1-2, fc2/4-5, fc2/8-38, fc2/43-48

switch(config-if)# no shutdown

switch(config-if)# end

switch# show interface brief

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------

Confirm that the ports are now operating with no restrictions on oversubscription ratios.

switch# show running-config | include oversubscription-limit

no rate-mode oversubscription-limit module 2 <---indicates no restrictions on

Save the new oversubscription ratio configuration to the startup configuration.

switch# copy running-config startup-config

Cisco MDS 9000 Family CLI Configuration Guide

Configuring Generation 2 Switches and Modules

End with CNTL/Z.

oversubscrption ratios

OL-16184-01, Cisco MDS SAN-OS Release 3.x

Chapters

Table of Contents