Displaying Zone Information - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Displaying Zone Information

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 3
switch(config-default-zone)# attribute
read-only
switch(config-default-zone)# no attribute
read-only
Displaying Zone Information
You can view any zone information by using the show command. If you request information for a
specific object (for example, a specific zone, zone set, VSAN, or alias, or keywords such as brief or
active), only information for the specified object is displayed. If you do not request specific information,
all available information is displayed. See Examples
Example 23-1 Displays Zone Information for All VSANs
switch# show zone
zone name Zone3 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:9c:48:e5
zone name Zone2 vsan 2
fwwn 20:41:00:05:30:00:2a:1e
fwwn 20:42:00:05:30:00:2a:1e
fwwn 20:43:00:05:30:00:2a:1e
zone name Zone1 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:a6:be:2f
pwwn 21:00:00:20:37:9c:48:e5
fcalias Alias1
zone name Techdocs vsan 3
ip-address 10.15.0.0 255.255.255.0
zone name Zone21 vsan 5
pwwn 21:00:00:20:37:a6:be:35
pwwn 21:00:00:20:37:a6:be:39
fcid 0xe000ef
fcid 0xe000e0
symbolic-nodename iqn.test
fwwn 20:1f:00:05:30:00:e5:c6
fwwn 12:12:11:12:11:12:12:10
interface fc1/5 swwn 20:00:00:05:30:00:2a:1e
ip-address 12.2.4.5 255.255.255.0
fcalias name Alias1 vsan 1
zone name Zone2 vsan 11
interface fc1/5 pwwn 20:4f:00:05:30:00:2a:1e
zone name Zone22 vsan 6
fcalias name Alias1 vsan 1
zone name Zone23 vsan 61
pwwn 21:00:00:04:cf:fb:3e:7b lun 0000
Cisco MDS 9000 Family CLI Configuration Guide
23-24
pwwn 21:00:00:20:37:a6:be:35
pwwn 21:00:00:20:37:a6:be:35
Chapter 23 Configuring and Managing Zones
Purpose
Sets read-only attributes for the default zone.
Reverts the default zone attributes to read-write
(default).
23-1 to 23-16.
OL-16184-01, Cisco MDS SAN-OS Release 3.x