Disabling Fast Spanning Tree Port Parameters - Alcatel Omni Switch/Router User Manual

Disabling Fast Spanning Tree Port Parameters

The command allows you to disable Fast Spanning Tree port parameters on a
selected group or
VLAN
where
Fast Spanning Tree port parameters. For example, to view parameters for Group 1, enter:
If Fast Spanning Tree is enabled, a screen similar to the following will appear:
To disable the Fast Spanning Tree feature, enter at the prompt. (If you press the Enter key
without typing anything, the setting will not be changed.)
No confirmation message will appear. To view the Fast Spanning Tree Port Summary, enter
at the prompt. For details about the Fast Spanning Tree Port Summary, see Displaying
Fast Spanning Tree Port Parameters on page 17-36.
To determine whether Fast Spanning Tree is enabled
on a
To disable Fast Spanning Tree on a
the prompt, then follow the onscreen instructions to
disable it. For more details, see Configuring Spanning
Tree Parameters on page 17-25.
. To disable Fast Spanning Tree, enter the
is the number of the group in the switch for which you want to view
o Important Notes o
, enter at the prompt.
VLAN
Configuring Fast Spanning Tree
command as shown:
, enter at
VLAN
Page 17-39