The Isdn Submenu - Alcatel Omni Switch/Router User Manual

The ISDN Submenu

The WAN menu contains a submenu,
ports.
To switch to, and to display, the
A screen similar to the following displays:
Switch Configuration
This section describes how to configure the ISDN ports on WSX-BRI boards. You use the
command to modify the configuration of an ISDN port. You must select the correct
type of telephone switch to which you will be making your ISDN calls, as well as supply
signalling calling addresses (phone numbers) and SPIDS, if required. Configuration is
described in the next section, Modifying an ISDN Configuration Entry on page 32-4.
The other commands on the ISDN submenu are described in the remaining sections of this
chapter.
, containing commands specific to WSX-BRI ISDN
menu, enter the following commands:
The ISDN Submenu
Page 32-3