Information On The Ports For One Wsx Board - Alcatel Omni Switch/Router User Manual

Obtaining Status and Statistical Information

Information on the Ports for One WSX Board

To obtain status information on a single
with the slot number for the
where
to obtain status information for the board in slot 4, you would enter:
This command displays a screen similar to the following:
Each row in the table corresponds to a port on the
PT
The Port number on the
Admin/Oper Status, Int Type, Speed Bps, DLCI Active/Inactive
These columns are described in the section, Information on All Boards in a Switch on page
29-38. Please refer to this section for detailed information.
Frames In
The total number of frames received on this port since the last time the switch was initialized.
Frames Out
The total number of frames sent on this port since the last time the switch was initialized.
Octets In
The total number of Octets, or bytes, received on this port since the last time the switch was
initialized. This statistic includes the data and Frame Relay header fields, but does not include
CRC or flag characters.
Octets Out
The total number of Octets, or bytes, sent on this port since the last time the switch was
initialized. This statistic includes the data and Frame Relay header fields, but does not include
CRC or flag characters.
Page 29-42
board, as follows:
WSX
is the slot number where the
board for which statistics are displayed.
WSX
board, you enter the
WSX
board is installed. For example, if you wanted
WSX
you requested information on.
WSX
command along