Modifying A Frame Relay Service - Alcatel Omni Switch/Router User Manual

Vport
The virtual port associated with this service. For bridging services, there is a one-to-one
mapping between a virtual port and a virtual circuit. For routing services, multiple virtual
circuits may map to a single virtual port. For trunking services, multiple virtual ports can map
to a single virtual circuit.
Description
The textual description given to this service when you set it up through the
command.
Service Type
A Frame Relay service may be
through the command. Bridging and Routing services may coexist on the same virtual
circuit. Trunking cannot coexist with either Bridging or Routing on the same virtual circuit.

Modifying a Frame Relay Service

You can modify previously created Frame Relay services using the
command uses the same screen as the
port and service number. For example:
would modify the first service on Port 3 for the
the same screen as the
type:
• Bridging
• Routing
• Trunking
,
command. Simply enter
command. See the appropriate section for modifying the service
See Configuring a Bridging Service on page 29-57.
See Configuring a WAN Routing Service on page 29-59.
See Configuring a Trunking Service on page 29-62.
Modifying a Frame Relay Service
or . All three service types are set up
command. The
, the slot, slash (/),
board in Slot 2. This command displays
WSX
or
Page 29-65