Managing Frame Relay Services - Alcatel Omni Switch/Router User Manual

Alcatel switch/router release 4.5

Hide thumbs Also See for Omni Switch/Router:

Table of Contents

Managing Frame Relay Services

By default, all virtual circuits on a

Group 1. The

Group and to set up a default routing service for the port. See Setting Configuration Parame-

ters on page 29-22 for information on the

To extend your control over a Frame Relay service, you can use Service menu commands.

These command allow you to create and modify bridging, routing, and trunking services by

assigning specific virtual circuits and Groups to the services.

Setting up a bridging service requires you to map a virtual circuit to a Group. Setting up a

routing service requires you to map one or more virtual circuits to a Group. And setting up a

Trunking service requires you to map a single virtual circuit to one or more Groups. The

diagrams below illustrate the relationship between Groups, virtual ports and virtual circuits for

each Frame Relay service type:

port have a Bridging service and are assigned to

command allows you to change this default bridging service to another

Managing Frame Relay Services

Show Quick Links

Table of Contents