Deleting Ports From An Omnichannel; Viewing Omnichannel Parameters - Alcatel Omni Switch/Router User Manual

OmniChannel

Deleting Ports from an OmniChannel

You can delete ports from an OmniChannel using the
steps:
1. Enter
2. The following prompt displays:
Enter the channel number on which you want to delete ports. You can check the current
port assignments for a given OmniChannel by using the
described in Viewing OmniChannel Parameters on page 15-14.
3. The following prompt displays:
Enter the port(s) that you want to delete from this OmniChannel.
port number for the first port, a dash (-), and the port number for the last port. For exam-
ple, to delete ports 3, 4, and 5 on the Fast Ethernet module in slot 2, you would enter:
cally contiguous, enter the slot number, a slash (/), the port number for the first port, a
comma (,), and the slot and port for the next port. For example, to delete ports 3 and 5
on the Fast Ethernet module in slot 2, you would enter:

Viewing OmniChannel Parameters

You can view the current configuration parameters and port assignments for an OmniChan-
nel by using the
1. Enter
2. The following prompt displays:
Enter the channel number for which you want to view information. If you want to view
information on all OmniChannels in the switch, simply press
Page 15-14
.
Important Note
If you delete the primary port a secondary port will
become the new primary port. The secondary port that
will take over this role is the first secondary port speci-
fied through the
. To delete a range of ports, enter the slot number, a slash (/), the
. To delete multiple ports (on the same module) that are not physi-
command. Follow these steps:
.
command. Follow these
command.
command, which is
.