Udp Relay Configuration Screen - Alcatel Omni Switch/Router User Manual

UDP Relay Configuration Screen
To configure any of the
the IP submenu. (For more information about IP commands, see Chapter 25, "IP Routing.")
The screen display is similar to the following:
Use the UDP Relay Configuration screen to enable any of the relays and display more config-
uration options for enabled relays. The following sections describe each
to configure each of the relays using the User Interface (UI). A
be displayed.
For general information about the UI, see Chapter 4,
"The User Interface."
relays, use the
UDP
o Note o

UDP Relay Configuration Screen

command. The command is listed in
UDP
statistics screen may also
UDP
service and how
Page 26-3