Viewing Port Statistics - Alcatel Omni Switch/Router User Manual

Viewing Port Statistics

Viewing Port Statistics
The command displays transmit and receive statistics for ports in the switch. Entering
displays statistics for all virtual ports in the switch. You can also display statistics for only
ports in a specific Group by specifying the Group ID after the command. For example, to
view statistics only for ports in Group 6, you would enter
You can also display statistics for a specific port by entering the slot and port number after
the command. For example, to view statistics only for Port 1 on the module in Slot 4, you
would enter
The same type of information is displayed for a single Group or port as is displayed for all
ports in a switch. The following screen shows a sample from the command when speci-
fied without any Group or port parameters.
These columns are described for the command on page 19-50.
The Service Type ( ) and Instance ( ) of this Service Type in the
switch.
Page 19-53