Configuring Switch Logging - Alcatel Omni Switch/Router User Manual

Configuring Switch Logging

Configuring Switch Logging
Switch logging is a feature that allows you to activate and configure the logging of various
types of switch information. Once you activate logging for a specific facility through the
switch logging command, you may also decide whether the log output should display on the
console, be saved to a file, or be both displayed and saved to a file. To enter the switch
logging submenu, enter
at the system prompt. A screen similar to the following displays:
The logging types are described here:
1) Security Logging
Enabling security logging allows you to view all security violations that occur within the
switch. Set to
switch. Set to
2) FTP Logging
Session Events is a record of all
FTP
activated. Once you enable
command (described in Displaying the Connection Entries in the MPM Log on page 10-
10). To disable
Page 10-6
to activate logging for any security violations that occur within the
to de-activate logging for security violations.
must be enabled in order to display
the Secure Switch Access violations log (
FTP
Logging by entering 2
FTP
Session Events logging, enter
FTP
o Note o
(File Transfer Protocol) activities since logging was
, you may view it through the
.
).