Viewing Information On A Single Port - Alcatel Omni Switch/Router User Manual

The WAN Port Software Menu
Field Descriptions
The following section explains the fields and their corresponding values.
PT
The port number on the
Admin/Oper Status, Int Type, Speed Bps
These columns are described in the section, Obtaining Information on All Boards in a Switch
on page 28-38. Please refer to this section for detailed information.
Frames In
The total number of frames received on this port since the last time the switch was initialized.
Frames Out
The total number of frames sent on this port since the last time the switch was initialized.
Octets In
The total number of octets, or bytes, received on this port since the last time the switch was
initialized. This statistic includes the data and Frame Relay or PPP header fields, but does not
include CRC or flag characters.
Octets Out
The total number of octets, or bytes, sent on this port since the last time the switch was
initialized. This statistic includes the data and Frame Relay or PPP header fields, but does not
include CRC or flag characters.

Viewing Information on a Single Port

To obtain status information on a single
the slot number for the
information, as follows:
or
where
number on the
Page 28-42
board for which statistics are displayed.
WSX
board and the port number for which you want to receive
WSX
is the slot number where the
board.
WSX
port, enter the
WSX
board is installed and
WSX
command, followed by
is the port