Configuring Fast Spanning Tree
Enabling Fast Spanning Tree Port Parameters
The
command allows you to activate Fast Spanning Tree port parameters on a
selected group or
where
Fast Spanning Tree port parameters. For example, to view parameters for Group 1, enter:
If Fast Spanning Tree is not enabled (default), a screen similar to the following will appear:
To enable the Fast Spanning Tree feature, enter at the prompt. (If you press the Enter key
without typing anything, the setting will not be changed.)
No confirmation message will appear. To view the Fast Spanning Tree Port Summary, enter
at the prompt. For details about the Fast Spanning Tree Port Summary, see Displaying
Fast Spanning Tree Port Parameters on page 17-36.
Page 17-38
. To enable Fast Spanning Tree, enter the
VLAN
is the number of the group in the switch for which you want to view
o Important Notes o
To determine whether Fast Spanning Tree is enabled
on a
, enter
at the prompt.
VLAN
To enable Fast Spanning Tree on a
the prompt, then follow the onscreen instructions to
enable it. For more details, see Configuring Spanning
Tree Parameters on page 17-25.
command as shown:
, enter
at
VLAN