Modifying A Ppp Entity - Alcatel Omni Switch/Router User Manual

Modifying a PPP Entity

The command is used to modify the parameters of an existing PPP Entity. To
modify a specific PPP Entity, for example Peer ID 1, enter the following command:
A screen similar to the following displays:
The fields on this screen are the same as those produced by the
Adding a PPP Entity on page 30-9 for descriptions of each of these fields.
Make the desired changes to any of the parameters, then enter the
implement the changes. You will then be returned to the system prompt.
Modifying a PPP Entity
command. See
command to
Page 30-15