Displaying A List Of "Global" Ipx Filters - Alcatel Omni Switch/Router User Manual

Configuring IPX RIP/SAP Filtering
GP:VL (s/p/vc) or (Peer ID)
The first number (
VLAN associated with this entry. When a filter applies to all interfaces, this field will say
"global." If an entry refers to a Frame Relay interface, column headings for slot, port, and
virtual circuit (
rather than to the entire VLAN. If an entry refers to a PPP interface, the Peer ID (
be displayed when the filter is applied to a particular PPP Peer.

Displaying a List of "Global" IPX Filters

To display a listing of just the global IPX filters, enter the following command:
A screen similar to the following displays:
Displaying a List of Specific IPX Filters
To display a listing of IPX RIP or SAP filters for a specific interface, you can specify other
parameters along with the
The type is one of these codes:
For example, to display a list of the filters defined for Group 1, VLAN 1, you would enter:
A screen similar to the following displays:
Page 27-24
) is the Group associated with this entry. The second number (
) may be displayed when the filter is applied to a particular virtual circuit
command. The format for the command in this case is:
for RIP INput
for RIP OUTput
for SAP INput
for SAP OUTput
for GNS OUTput
) is the
) may