Viewing The Ip Forwarding Table - Alcatel Omni Switch/Router User Manual

Viewing the IP Forwarding Table

Viewing the IP Forwarding Table
The command is used to display the IP Forwarding Table. The entries in the table show
the routes entered by a routing protocol, if the switch is running any of the supported proto-
cols, and the static routes that you may have entered manually. You can also add to, or
remove static routes from, the IP Forwarding Table (see Adding an IP Static Route on page
25-17 and Removing an IP Static Route on page 25-19).
To display the IP Fowarding Table, enter the following command:
A screen similar to the following displays:
If routing domains are configured on the switch, the command will display the forward-
ing table for the default routing domain only. Routing domains are part of Advanced Routing
software and are not part of the base code. For more information about routing domains, see
Chapter 14, "Routing Domains," in the Advanced Routing User Manual.
To display the forwarding table for a routing domain other than the default domain, enter the
command with the relevant routing domain ID. For example:
The screen display is similar to the following:
Page 25-15