Deleting A Group - Alcatel Omni Switch/Router User Manual

Deleting a Group

You can delete a Group as long as it does not contain any virtual ports. The default Group,
Group #1, cannot be deleted. To delete a Group, enter
you want to delete. For example, if you wanted to delete Group 5, you would enter:
If the Group does not contain any virtual ports, then a confirmation message displays:
If the Group still contains virtual ports, then a message similar to the following displays:
You must first remove the Group's virtual ports before the Group can be removed. The
command allows you to remove virtual ports. See Deleting a Virtual Port on page 19-46 for
information on using this command.
Some commands in the Bridge Management menu
(described in Chapter 17, "Configuring Bridging Param-
eters") require you to select a Group before making
configuration changes. If you delete the currently
selected Group with
selected Group reverts to the default Group, Group #1.
followed by the Group number
o Note o
, then the new currently
Deleting a Group
Page 19-43