Viewing Ppp Entity Configurations - Alcatel Omni Switch/Router User Manual

Viewing PPP Entity Configurations

Viewing PPP Entity Configurations
The
Displaying the Configuration of All PPP Entities
To view configuration information on all PPP Entities, enter the following command:
A screen similar to the following displays:
The fields on this screen have the following meanings:
Peer ID
The number assigned to this PPP Entity when it was added. Used to identify a specific PPP
Entity that you want to examine with the
Admin Status
Indicates the Administrative Status of this PPP Entity.
operative.
Mode
Indicates whether
is described under the heading Multi-Link PPP on page 30-2.
Authentication
Indicates the type of authentication used by this PPP Entity. The options are
. These are two well-established standards currently used for PPP authentication.
Compression
Indicates the type of data compression configured to operate with this PPP Entity. The
options are
STAC-LZS compression.
Bridging Group
Indicates the VLAN Group to be used for PPP Bridging. A value of zero ( ) indicates that this
PPP Entity will not perform a bridging service and will discard all bridged format packets
received or transmitted.
Page 30-16
command is used to view the configuration parameters of existing PPP Entities.
means that this entity is disabled, or inoperative.
or operation is used by this PPP Entity. Multilink operation
" or ." See Data Compression on page 30-2 for information on
or commands.
means that this entity is enabled, or
, and