Setting Resource Thresholds - Alcatel Omni Switch/Router User Manual

Setting Resource Thresholds

Setting Resource Thresholds
The health statistics software operates by monitoring set threshold levels on consumable
resources. When a resource exceeds a set level, a trap is generated and sent. These threshold
levels are set for the entire switch (or device) by using the
old level for a switch's consumable resources, enter the
prompt. The following screen appears:
There are three sets of resources that are configurable:
•
for received traffic, sent traffic, and the backplane. For more information on setting band-
width thresholds, see Setting Bandwidth Thresholds on page 11-3.
•
usage, virtual port usage, and temperature. For more information on setting miscellaneous
thresholds, see Setting Miscellaneous Thresholds on page 11-4.
•
checks. For information on how to set the sampling interval, see Setting the Sampling Inter-
val on page 11-6.
Page 11-2
. These settings allow you to set a percentage of available bandwidth
. These settings allow to set a percentage for memory usage,
. The sampling interval is the number of seconds between health statistics
command. To set the thresh-
command at the system
VCC