Using Ipxr With Frame Relay Or Isdn Boards - Alcatel Omni Switch/Router User Manual

Viewing the IPX Routing Table
Chg
The information in this route has recently been updated, but the new information has not yet
been forwarded to neighbor routers.
Dir
Indicates that this is a local interface (direct route) as opposed to a route to a destination
network.
GP:VL
The first number is the Group associated with this entry; the second number is the
ciated with this entry. This identifies the interface used when sending traffic to the destina-
tion network.

Using IPXR with Frame Relay or ISDN Boards

The following additional column heading appears in the
ISDN board is installed in the switch:
s/p/vc or Peer ID
The Slot, Port and Virtual Connection (i.e., DLCI) identifiers or the PPP Peer ID of the inter-
face on which the routing information was received.
Here is an example of a display generated by the
In this example, traffic destined for Network 5000 will go through Slot 5, Port 3, DLCI 100
which is associated with the interface on Group 4.
Page 27-6
display when a Frame Relay or
command in this situation:
asso-
VLAN