Example 2 - Alcatel Omni Switch/Router User Manual

BOOTP/DHCP Relay
Because the clients in group 3 are not on the same segment as the
request an
IP
frame is received by the
the -ready clients in group 3 must be members of the same
DHCP
have the
BOOTP

Example 2

This application example has a single group in a network with a mix of
clients.
DHCP
segment. There are two types of AutoTracker policies defined within the group—IP address
and IP protocol.
VLAN
Network 125.0.0.0
IP
125.0.0.1
Non-DHCP
Whenever AutoTracker receives an
policy match. In the case of
Without an IP address, AutoTracker will not be able to place the client into a
IP address. Therefore, the client will become a member of the
Protocol policy (i.e.,
Page 26-8
address via the relay routing entity in the switch. When a
BOOTP
relay entity, it will be forwarded from group 3 to group 2. All
BOOTP
relay function configured.
-ready and non-
DHCP DHCP
UDP Relay
Group 2
10 VLAN
Network 130.0.0.0
IP
140.0.0.22
140.0.0.2
DHCP Server DHCP Client
130.0.0.11 130.0.0.12
Non-DHCP Non-DHCP
AutoTracker IP Policy Places DHCP Clients in Same VLAN
IP
, the client generates an IP frame without an IP address.
DHCP
).
VLAN 30
clients can coexist in the same network, group, or
20 VLAN
Protocol Policy
IP
140.0.0.20
DHCP Client
130.0.0.13
Non-DHCP
frame, it examines the frame for an
server, they must
DHCP
request
DHCP
, and the switch must
VLAN
-ready and non-
DHCP
Omni Switch/Router
12345678
123456
30
130.0.0.14 130.0.15
Non-DHCP Non-DHCP
network layer
IP
based on
VLAN
defined by a general IP
VLAN