Disabling Ipx Serialization Filtering - Alcatel Omni Switch/Router User Manual

5. Filtering will then become active. A message will appear indicating that IPX Serialization
Filtering is enabled, either on all WAN routing services or for a specific Group:

Disabling IPX Serialization Filtering

Follow the steps below to disable IPX Serialization Packet Filtering.
1. Enter .
A screen similar to the following displays:
Enter if you do want to see the current filtering status. Enter
entered this command by mistake or if you don't need to see the current status.
2. A screen similar to the following displays:
This screen shows the WAN routing Groups that exist in the switch and the current status
of the IPX Serialization packet filtering for these groups.
Enter a Group number to proceed to disable IPX Serialization filtering for that Group.
Or, just press
3. The following prompt displays:
Enter (or press
4. The following prompt displays:
This prompt requires you to verify that you want to disable filtering. This example prompt
asks if you want to disable filtering on all WAN routing services. If you had entered a
specific Group number, the prompt would refer to that particular Group.
Enter to disable IPX Serialization Filtering.
5. A message will appear indicating that IPX Serialization Filtering is disabled, either on all
WAN routing services or for a specific Group:
to select to proceed to disable filtering for all WAN routing services.
) to select to disable Serialization Filtering.
Configuring IPX Serialization Packet Filtering
(or press ) if you
Page 27-27