Deleting A Virtual Port - Alcatel Omni Switch/Router User Manual

Deleting a Virtual Port

Deleting a Virtual Port
You can delete a virtual port from its existing Group by using the
remove a virtual port, the port is moved to the default switch Group, Group #1, and all port
parameters are reset to defaults except for the port name. For example, if you configured a
port with a special flood limit and customized translation settings and you then removed the
port, you would lose those port settings.
To remove a port, enter the
currently resides and the physical slot and port number for the port:
For example, to delete Port 7 on the module in Slot 4, and the Port currently resides in Group
6, you would enter:
A prompt displays requesting that you confirm the deletion:
Enter a and press
deletion:
If the port you specified did not exist in the Group you specified in the
a message similar to the following would display:
Page 19-46
command, followed by the Group number where the port
to remove the port. Another message displays confirming the
command. When you
command, then