Alcatel Omni Switch/Router User Manual page 528

The Switch Menu
If the port selected is an Ethernet based port, something like the following would be
displayed:
The fields displayed by the option of the
. The total number of octets transmitted or received in good or bad frames on this
port.
unicast format.
is a unicast format.
a multicast format.
address is a multicast format.
the broadcast address.
Page 18-32
o Note o
The first group of statistics are the numbers of bytes
transmitted and received. These are useful in working
out bandwidth usage by the port. Bad octets are impor-
tant to count in the total octets count as they consume
bandwidth at the expense of useful traffic. To ignore
them would lead to mysterious loss of bandwidth in
any calculations performed.
. The total number of bytes received in good frames.
. The total number of bytes received in bad frames.
. The total number of bytes successfully transmitted.
. The number of frames received on this port whose destination address is a
. The number of frames transmitted on this port whose destination address
. The number of frames received on this port whose destination address is
. The number of frames transmitted on this port whose destination
. The number of frames received on this port whose destination address is
command are described below: