Configuring Fast Spanning Tree - Alcatel Omni Switch/Router User Manual

Configuring Fast Spanning Tree

Configuring Fast Spanning Tree
The Fast Spanning Tree (Rapid Reconfiguration) feature is designed to help provide an
802.1D standards-based method of quick recovery in the event of link, port and device
failures in an Ethernet local area network. By automatically identifying and utilizing
alternative secondary links, Fast Spanning Tree can rapidly converge backup connections
between network devices within as little as 1 second. In addition, new Spanning Tree
information can be processed faster.
If packets are broadcast to all ports (or flooded) in an attempt to deliver the data, networks
with physical loops will rebroadcast packets repeatedly and cause a network to become
severely congested. This congestion will adversely affect network performance.
While Spanning Tree prevents broadcast storms by blocking ports in the physical topology
that could result in flooded traffic being looped, Fast Spanning Tree minimizes downtime by
bringing these blocked secondary links into Forwarding mode as quickly as possible. If the
Root Port is lost, an Alternate Port on the Bridge can be made the new Root Port, and placed
into a Forwarding state immediately. The prior Root Port switches to a Listening state if it
becomes a Designated Port; otherwise, it enters a Blocking state.
Similarly, any Designated Port on the Bridge can be made the new Root Port, and placed into
a Forwarding state immediately. In this event, the existing (prior) Root Port changes to a
Designated Port role, without a corresponding gain or loss of connectivity. A Backup Port can
also be made the new Root Port and placed into Forwarding mode, resulting in the
Designated Port assuming a Listening state.
The following diagram illustrates how a typical network connection can fail, such as the A-C
Link shown below. Rapid Reconfiguration brings a blocked link - such as the B-C Link - into
Forwarding state, helping achieve quick recovery from failure of networked devices.
Bridge A
(Root Bridge)
Root Port =
Spanning Tree Link =
Redundant Link =
Designated Bridge for Link =
Page 17-34
Bridge C
Bridge B
(Backup Root 1)
Recovering from Linked Device Failure with Fast Spanning Tree
Bridge C
Bridge A
A-C Link that will Fail =
B-C becomes Root Port for C
Bridge B