View Port-Level Statistics; Reset Health Statistics - Alcatel Omni Switch/Router User Manual

View Port-Level Statistics

For descriptions of the statistics, see View Switch-Level Statistics on page 11-6.
View Port-Level Statistics
To view port-level statistics, type the
where
slot 3, enter the following:
The following screen is displayed:
Statistics are displayed as percentages of the total resource capacity, and represent data taken
from the last sampling interval. If a threshold for a resource was exceeded, then that statistic
is marked with an asterisk (*). For descriptions of the monitored resources, see Setting Band-
width Thresholds on page 11-3 and Setting Miscellaneous Thresholds on page 11-4 above.
For descriptions of the statistics, see View Switch-Level Statistics on page 11-6.

Reset Health Statistics

To reset the health statistics for the switch, type the
following message is displayed:
To confirm your choice to clear the switch health statistics, type at the prompt. After you
confirm your choice, the following confirmation notice is displayed:
Page 11-8
The and memory resources are not applicable to
CPU
the module level statistics display, and therefore are not
shown.
is the slot number and
The command clears the statistics for the entire
switch. You cannot clear statistics for the module or
port level only.
♦ Note ♦
command at a system prompt as shown:
is the port number. For example to view port 1 on
command at a system prompt. The
♦ Note ♦