Creating A Vlan For Banyan Vines Traffic - Alcatel Omni Switch/Router User Manual

Alcatel switch/router release 4.5

Hide thumbs Also See for Omni Switch/Router:

Getting started manual (28 pages)

Table of Contents

Creating a VLAN for Banyan Vines Trafﬁc

Banyan Vines uses a fixed encapsulation for each network interface. For this reason, it is

straightforward to create a

uses Ethernet II encapsulation; Token Ring uses

describes how to create a

create a Banyan Vines

at any prompt.

2. The following prompt displays:

Enter the number for the Group to which this Banyan Vines

3. The following prompt displays:

Enter the number that will identify this

the system displays the next available

4. The following prompt displays:

Enter a textual description that will help you identify the

, "Banyan Vines

5. The following prompt displays:

Enter whether or not you want the Administrative Status for this

disabled. Once enabled, the switch begins using the policies you defined. A disabled

is still defined (name, number, policies intact), but the switch keeps the

disabled. The enable/disable status may be changed at a later time using the

6. The following menu displays:

7. The following prompt displays:

to enable this rule. When enabled, the

mine membership of devices.

for Banyan Vines traffic. For Ethernet traffic, Banyan Vines

for Ethernet, Token, and

." You may use up to 30 characters for this description.