Callpilot Server Configuration; Callpilot Server Configuration Tasks; Logging On To The Callpilot Server; Completing The Setup Wizard And Installing Peps - Nortel CallPilot Quick Start Manual

CallPilot server configuration
This task describes the CallPilot server configuration.
CallPilot server configuration tasks
The following is a list of tasks you perform to configure the CallPilot server.
To link to detailed procedures for each task, click the text.
•
•
•
•
•

Logging on to the CallPilot server

Perform the following procedure to log on to the CallPilot server.
Step
1
2

Completing the Setup Wizard and installing PEPs

Perform the following procedure to install Service Updates (SU) and PEPs
on the CallPilot server.
Step
1
2
Copyright © 2007, Nortel Networks
.
"Logging on to the CallPilot server" (page 47)
"Completing the Setup Wizard and installing PEPs" (page 47)
"Running the Configuration Wizard" (page 49)
"Configuring new mailboxes and additional tasks" (page 52)
"Backing up the system" (page 53)
Action
From the local console, for the user name, enter administrator.
From the local console, for the password, enter Bvw250.
Action
After you log on, the Setup Wizard appears automatically.
Click Next on the Welcome page of the Setup Wizard.
Insert the PEP CD into the DVD-ROM drive.
Nortel CallPilot
Quickstart Guide

NN44200-313 01.01 Standard

5.0 11 July 2007
—End—
47