Enabling Or Disabling Autoscroll - Nortel IP Phone 2002 User Manual

26 Using the Feature menu
3
4
5
6

Enabling or disabling AutoScroll

Follow this procedure to configure the Auto Scroll feature.
If AutoScroll is enabled, the IP Phone display automatically opens the
screen for the feature selected when you press a feature key.
Step
1
2
3
4
5
Copyright © 2006, Nortel Networks
.
Select and open Assign.
If the key you selected in step 2 is assigned to a Centrex feature,
these soft key labels appear: Key Type and Autoscroll.
If the selected key is assigned to a local feature, these soft key labels
appear: Key Type and Feature.
Press Key Type.
The Key Type screen appears. A check mark appears beside the
type currently assigned to the key.
Perform one of these actions:
• To change Central to Local, select Local.
• To change Local to Central, select Central.
Press Ok.
The key type is changed and a check mark appears beside the
selection.
Action
From the main menu, open the Feature menu.
The Feature menu opens.
From the Feature menu, select and open the Assign menu.
The Assign menus opens.
From the Assign menu, select Auto Scroll and press Ok.
The AutoScroll screen appears.
Perform one of these actions:
•
To enable autoscroll, select Enable.
• To disable autoscroll, select Disable.
Press Ok.
Carrier VoIP
Nortel IP Phone 2002 User Guide
NN10300-007 06.04 Standard
(I)SN09U 20 October 2006
—End—
Nortel Networks Confidential