Show Eap Pac Peer - Cisco Catalyst 3650 series Command Reference Manual

show eap pac peer

To display stored Protected Access Credentials (PAC) for Extensible Authentication Protocol (EAP) Flexible
Authentication via Secure Tunneling (FAST) peers, use the show eap pac peer command in privileged EXEC
mode.
show eap pac peer
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples This is an example of output from the show eap pac peers privileged EXEC command:
Device> show eap pac peers
No PACs stored
Related Commands
Command
clear eap sessions
Description
Clears EAP session information for the switch or for the specified port.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show eap pac peer
Modification
This command was introduced.
817