Show Eap - Cisco Catalyst 3560-X Command Reference Manual

show eap

show eap
Syntax Description
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
2-568
Downloaded from www.Manualslib.com
Use the show eap privileged EXEC command to display Extensible Authentication Protocol (EAP)
registration and session information for the switch or for the specified port.
show eap {{registrations [method [name] | transport [name]]} | {sessions [credentials name
[interface interface-id] | interface interface-id | method name | transport name]}}
[credentials name | interface interface-id | transport name] [ | {begin | exclude | include}
expression]
registrations Display EAP registration information.
method name (Optional) Display EAP method registration information.
transport name (Optional) Display EAP transport registration information.
sessions Display EAP session information.
credentials name (Optional) Display EAP method registration information.
interface interface-id (Optional) Display the EAP information for the specified port (including
type, stack member (stacking-capable switches only) module, and port
number).
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
When you use the show eap registrations privileged EXEC command with these keywords, the
command output shows this information:
• None—All the lower levels used by EAP and the registered EAP methods.
method name keyword—The specified method registrations.
•
• transport name keyword—The specific lower-level registrations.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02