Display Uni-Information - 3Com S7906E Command Reference Manual

Multicast-mode : multicast control

display uni-information

Syntax
display uni-information uni-number
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the display uni-information command to display the state information about the current UNI.
This command takes effect on H3C ONUs only.
Examples
# Display the state information about UNI 1 of the ONU.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] display uni-information 1
uni-number : 1
flow-control : closed
PHY admin state for ethernet port : UP
port-policy :
inbound :
CIR : 102400
Bucket depth : 0
Extra burst size : 0
outbound :
CIR : 102400
Vlan-configration :
Current-vlan-mode : transparent
Field
2-10
Description
Multicast mode: IGMP Snooping (IGSP) or
multicast control