Display Onuinfo Mac-Address - 3Com S7906E Command Reference Manual

Field
Port
Board/Ver
Sft/Eeprom
State
Aging
Error: The port's state should
be up!

display onuinfo mac-address

Syntax
display onuinfo mac-address mac-address
View
Any view
Default Level
2: System level
Parameters
mac-address: MAC address of the ONU.
Description
Use the display onuinfo mac-address command to display the information about the legal ONU with
the specified MAC address.
Examples
# Display the information about the legal ONU with the specified MAC address.
<Sysname> display onuinfo mac-address 000f-e276-4b93
ONU Mac Address LLID Dist(M)
000f-e276-4b93
--- 1 entry found
For the command output description, refer to
Number of the port to which an ONU is bound. N/A displays if the
ONU is not bound to any ONU port.
ONU model and PCB version number. N/A displays if the ONU is
not registered.
ONU software version number and EEPROM version number.
N/A displays if the ONU is not registered.
State of an ONU:
Silent displays if the ONU is powered on but not bound to an
ONU port.
Offline displays if the ONU is not powered on but bound to an
ONU port.
Up displays if the ONU is started up and bound to an ONU
port.
Down displays if the ONU is bound to an ONU port but is shut
down manually.
MAC address aging time of an ONU in the silent state. N/A
displays if the ONU is not in the silent state.
The OLT port is not UP.
Port
1 <50 Onu4/0/1:2
---
Table
1-15
Description
Board/Ver Sft/Epm
ET704-A-L/B 110/100
1-10.
State Aging
Up N/A