display ip-subnet-vlan vlan
Syntax
display ip-subnet-vlan vlan { vlan-id [ to vlan-id ] | all }
View
Any view
Default Level
2: System level
Parameters
vlan-id: VLAN ID, in the range 1 to 4094.
to: Specifies a VLAN ID range. The argument after this keyword must be greater than or equal to the
one before this keyword.
all: Specifies all the VLANs.
Description
Use the display ip-subnet-vlan vlan command to display the IP subnet information and IP subnet
indexes on the specified VLAN(s).
Related commands: display vlan.
Examples
# Display the IP subnet information of all VLANs.
<Sysname> display ip-subnet-vlan vlan all
VLAN ID:
3
Subnet Index
====================================================
0
Table 1-7 display ip-subnet-vlan vlan command output description
Field
VLAN ID
Subnet Index
IP Address
Subnet Mask
ip-subnet-vlan
Syntax
ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ]
undo ip-subnet-vlan { ip-subnet-index [ to ip-subnet-end ] | all }
IP Address
Subnet Mask
192.168.1.0
255.255.255.0
VLAN ID
IP subnet index
IP address of the subnet (can be an IP address or a network address)
Mask of the IP subnet
Description
1-29