Mirroring-Port; Monitor-Port - 3Com S7906E Command Reference Manual

mirroring-port

Syntax
[ mirroring-group group-id ] mirroring-port { inbound | outbound | both }
undo [ mirroring-group group-id ] mirroring-port { inbound | outbound | both }
View
Ethernet port view
Default Level
2: System level
Parameters
group-id: Port mirroring group number, in the range of 1 to 4.
both: Duplicates both inbound and outbound packets.
inbound: Duplicates the inbound packets only.
outbound: Duplicates the outbound packets only.
Description
Use the mirroring-port command to configure a port as a source mirroring port of a port mirroring
group.
Use the undo mirroring-port command to remove a source mirroring port from a port mirroring group.
Note that:
If you do not specify the mirroring-group group-id keyword-argument combination, these two
commands apply to port mirroring group 1.
The source port cannot be a member port of the current mirroring group.
A remote destination mirroring group cannot contain source mirroring ports.
Examples
# Configure Ethernet 2/0/1 as a source mirroring port of remote source port mirroring group 2.
<Sysname> system-view
[Sysname] mirroring-group 2 remote-source
[Sysname] interface Ethernet 2/0/1
[Sysname-Ethernet2/0/1] mirroring-group 2 mirroring-port both

monitor-port

Syntax
[ mirroring-group group-id ] monitor-port
undo [ mirroring-group group-id ] monitor-port
View
Ethernet port view
1-7