Dhcp Server Ping Packets; Dhcp Server Ping Timeout - 3Com S7906E Command Reference Manual

Use the undo dhcp server ip-pool command to remove the specified DHCP address pool.
By default, no DHCP address pool is created.
Related commands: dhcp enable.
Examples
# Create the DHCP address pool identified by 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]

dhcp server ping packets

Syntax
dhcp server ping packets number
undo dhcp server ping packets
View
System view
Default Level
2: System level
Parameters
number: Number of ping packets, in the range of 0 to 10. 0 means no ping operation.
Description
Use the dhcp server ping packets command to specify the maximum number of ping packets on the
DHCP server.
Use the undo dhcp server ping packets command to restore the default.
The number defaults to 1.
Examples
# Specify the maximum number of ping packets as 10.
<Sysname> system-view
[Sysname] dhcp server ping packets 10

dhcp server ping timeout

Syntax
dhcp server ping timeout milliseconds
undo dhcp server ping timeout
View
System view
1-6