Display Cfd Service-Instance - 3Com S7906E Command Reference Manual

Table 1-11 display cfd remote-mep command output description
Field
MEP ID
MAC Address
State
Time
MAC Status

display cfd service-instance

Syntax
display cfd service-instance [ instance-id ]
View
Any view
Default level
2: System level
Parameters
instance-id: Service instance, ranging from 1 to 32767.
Description
Use the display cfd service-instance command to display the configuration information of service
instance.
Without specifying the service instance ID, the command will display the configuration information of all
service instances. With service instance ID specified, this command will display the configuration
information of the specified service instance.
Examples
# Display the service instance configuration information.
<Sysname> display cfd service-instance
2 service instance(s) configured:
Service instance 5:
Maintenance domain: mdtest_5
Maintenance association: matest_5
Level: 5
Service instance 6:
Maintenance domain: mdtest_6
Maintenance association: matest_6
Level: 6
ID of the remote MED
MAC address of the remote MEP device
Running state of MEP, either OK or FAILED
Recent time of the remote MEP when it is FAILED or OK.
State of the port indicated by the last CCM received from the remote
MEP, either UP or DOWN
VLAN: 5 MIP rule: None
VLAN: 6 MIP rule: None
Description
CCM interval: 1s
CCM interval: 1s
1-21