Protocol-Vlan - 3Com S7906E Command Reference Manual

Configuring GigabitEthernet2/0/1... Done.
[Sysname-Bridge-Aggregation1] port hybrid protocol-vlan vlan 2 0

protocol-vlan

Syntax
protocol-vlan [ protocol-index ] { at | ipv4 | ipv6 | ipx { ethernetii | llc | raw | snap } | mode { ethernetii
etype etype-id | llc { dsap dsap-id [ ssap ssap-id ] | ssap ssap-id } | snap etype etype-id } }
undo protocol-vlan { protocol-index [ to protocol-end ] | all }
View
VLAN view
Default Level
2: System level
Parameters
at: Specifies the AppleTalk based VLAN.
ipv4: Specifies the IPv4 based VLAN.
ipv6: Specifies the IPv6 based VLAN.
ipx: Specifies the IPX based VLAN. The keywords ethernetii, llc, raw, and snap are encapsulation
formats for IPX.
mode: Configures a user-defined protocol template for the VLAN, which could also have four
encapsulation formats, namely, ethernetii, llc, raw, and snap.
ethernetii etype etype-id: Specifies to match Ethernet II encapsulation format and the corresponding
protocol type values. The etype-id argument is the protocol type ID of inbound packets, in the range
0x0600 to 0xffff (excluding 0x0800, 0x809b, 0x8137, and 0x86dd).
llc: Specifies to match the llc encapsulation format.
dsap dsap-id: Specifies the destination service access point, in the range of 00 to 0xff.
ssap ssap-id: Specifies the source service access point, in the range of 00 to 0xff.
snap etype etype-id: Specifies to match SNAP encapsulation format and the corresponding protocol
type values. The etype-id argument is the Ethernet type of inbound packets, in the range 0x0600 to
0xffff (excluding ipx snap under the snap encapsulation format).
protocol-index: Protocol index, which specifies the protocol template to be bound with the current VLAN,
in the range 0 to 15. System will automatically assign an index if this parameter is not specified.
to protocol-end: Specifies the end protocol index, in the range 0 to 15. The protocol-end argument must
be greater than or equal to the protocol-index argument.
all: Specifies to remove all the protocols bound with the current VLAN.
1-26